alphatronics AlphaVision ML - Power Failure Reporting Delay (V3.50 and Higher); Dialer

Installer manual AlphaVision ML Rev. 3.60 01-01-2015 76
230V power failure reporting delay (V3.50 and higher)
A delay time can be programmed before the power failure (230V) is reported to the monitoring station. This
also applies for a power failure of I/O modules with power supply (art.code 004312). The time is
programmable between 00-99 minutes.
DIALER
The DIALER menu offers the following three options:
 PSTN/GSM reporting
 LAN/GPRS reporting
 Remote Service