Coulter raised position
using 125
Coupling
supply lines to the hose package 59
Coupling the supply lines to the hose package 59
Coupling the universal joint shaft 60
Cutting disc drive
Adjusting on the PreTeC coulter 187
Cutting discs
Adjusting the distance on the FerTeC Twin
coulter 190
Adjusting the distance on the PreTeC coulter 186
Checking and replacing on the FerTeC Twin
coulter 189
Checking and replacing on the PreTeC coulter 185
D
Depth control wheel
Adjusting the scraper 125
Depth control wheels
blocking 231
Determining the grain size 90
Determining the maximum fertiliser spread rate 131
Dimensions 47
Disc closer
adjustment 120
Disconnecting the supply lines from the hose
package 179
Distributor head
cleaning 213
Documents 46
E
Electrically driven fertiliser metering
Determining the maximum fertiliser spread
rate 131
Electronic monitoring and operation 44
Eliminating faults 226
Emptying the fertiliser hopper 168
Emptying the fertiliser metering unit 172
F
Fan speed
adjusting via the hydraulic system 79
adjusting via the PTO shaft 78
FerTeC Twin coulter
Adjusting the cutting disc distance 190
Checking and replacing the cutting discs 189
Checking and replacing the inner scraper 190
Fertiliser metering unit
cleaning 203
Filling auger
adjusting 144
Filling the fertiliser hopper
from the loading board 68
Filling the fertiliser hopper with the filling auger 69
Fill level in the singling unit housing is too high 232
Folding in the track marker
Precea 4500 / 4500-2 161, 162
Frame ballasting
adjustment 140
Front axle load
calculation 55
Front ballasting
calculation 55
Furrow former
changing 124
G
Gear oil 54
Grain spacing
manually calculating 101
Greasing
Central fertiliser metering drive 224
Electric agitator shaft drive 225
Information for roller chain maintenance 218
Interchangeable wheel gear 220
Leading wheel drive 218
Mechanical metering drive 223
Trailing wheel drive 221
H
Hydraulic hose lines
checking 197
coupling 61
uncoupling 180
MG6660-EN-II | D.1 | 27.09.2021
242