4-14 | IPS-4 Dual Bench (UV / IR) Analyzer
Next Cal 1
Displays the time remaining until the next Auto-Calibration 1 func-
tion. The duration and units between Auto-Calibrations is determined
by the duration entered in the timer interval and the unit entered
in the unit on the Automatic Calibration 1 screen. The Calibration
Trigger (TIMER 1) must be selected for the countdown time to be
displayed. Refer to the section “Calibration Control” in this chapter for
descriptions about setting up all Auto-Calibration parameters.
Next Cal 2
Displays the time remaining until the next Auto-Calibration 2 func-
tion. The duration and units between Auto-Calibrations is determined
by the duration entered in the timer interval and the unit entered
in the unit on the Automatic Calibration 2 screen. The Calibration
Trigger (TIMER 2) must be selected for the countdown time to be
displayed. Refer to the section “Calibration Control” in this chapter for
descriptions about setting up all Auto-Calibration parameters.
To Next Page
Loading...
Need help?
General
