Ametek IPS-4 User Manual

SPECIAL WARNINGS AND INFORMATION
Equipment Used in Class I, Division 1 and Zone 1
Hazardous Locations
Refer to Chapter 2 – Specifications for details about the suitability of this equipment in hazard-
ous areas.
Explosion Hazard – Substitution of Components May Impair Suitability for hazardous loca-
tions.
Risque d’explosion – La substitution de composants peut rendre ce materiel inacceptable
pour les emplacements est designé dangereux.
Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched O or
the Area is Known to be Non-Hazardous.
Risque d’explosion – Avant de déconnecter l’équipement, coupez le courant où vous assurez
que l’emplacement est designé non dangereux.
For installations using North American wiring practice, all input and output wiring must be in accordance
with Class I, Division 1 and Zone 1 wiring methods (NEC Sec 501.10(a) and 505.15(b) or (CEC-18 106
or IEC 60079-14) and in accordance with the authority having jurisdiction.
!
!
WARNING
!
Avertissement
WARNING
!
Avertissement
Contents | xv

Ametek IPS-4 Specifications

General

Brand	Ametek
Model	IPS-4
Category	Measuring Instruments
Language	English