Ametek IPS-4

7-8 | IPS-4 Dual Bench (UV / IR) Analyzer
Parameters
Trends for the following system parameters are available for display:
• Bench Temperature
• Heater Temperature
• Lamp Temperature
• Cell Temperature
• Cell Pressure
• Manifold Pressure
• Aspirator Pressure
• Electronics Temperature
• Analytes Concentration
Intervals
Trend intervals for selected parameters are available in one second, fifteen
seconds or one hour data points. The analyzer stores 3600 parameter data
points in temporary memory prior to overwriting data.
• 1 second interval will contain 60 minutes before overwriting
• 15 second interval will contain 900 minutes or 15 hours before over-
writing
• 1 hour interval will contain 3,600 hours or 150 days before overwrit-
ing.