Service and Parts | 6-5
Spare Analyzer Fuses
Choose the appropriate fuses (120 or 240 VAC) for the application.
These main analyzer fuses do not need to be changed out at regular
intervals, but AMETEK recommends these fuses are available in the
event that a replacement fuse is required.
Fuses, IPS-4 Analyzer – Recommended Parts to Have On-Site
120 V Analyzers 240 V Analyzers
Description (Location) Part No. Fuse Type Part No. Fuse Type
Main AC Power (F1) 301-0863 6.3 A 301-0863 6.3 A
DC Power (F2) 301-0861 2.0 A 301-0861 2.0 A
Oven Heater (F3) 301-0862 4.0 A 301-0861 2.0 A
Bench Heater (F4) 301-0860 1.0 A 301-0859 0.5 A
These fuses are located on the AC Terminal in the Electronics Enclosure.
Expo Technologies MiniPurge
®
System With eTimer
Spare Parts
AMETEK recommends replacing the Battery Pack in the Expo
Technologies MiniPurge
®
System, which provides power to the system’s
electro-pneumatic timer, every three years to ensure the MiniPurge
®
System continues to properly purge the AMETEK analyzer’s Electronics
Enclosure.
QTY
Part No. Description (3 Year)
301-4356 Battery Pack, Intrinsically Safe for Expo Technologies
MiniPurge® System with eTimer 1
NOTE
To Next Page
Loading...
Need help?
General
