Ametek IPS-4 User Manual

4-2 | IPS-4 Dual Bench (UV / IR) Analyzer
Introduction to the User Interface Panel
Figure 4-1 illustrates the layout of the analyzer User Interface Panel.
User Interface Panel Components
The User Interface Panel is made up of two main areas:
• The Vacuum Fluorescent Display consists of a 256 by 64 dot graphic
display. The information displayed depends on the mode of operation
you are working in.
- The bottom line displays the main menu items which can be ac-
cessed by pressing the corresponding blank keypad square (on the
Soft Keys Keypad) directly below it.
For information about the main menu items, and the sub-menu
items, refer to “Working in the Main Menus” in this chapter.
- The other lines can display the output results (concentrations,
temperatures, pressures), alarms (current and historical), system
status, system information, and various configurable parameters
that allow you to set up the analyzer to perform various functions
(calibration, communication, etc.).
Vacuum Fluorescent Display
(256 by 64 dot graphic)
Soft Keys Keypad
Main Keypad
Figure 4-1.
User Interface Panel
layout.

Ametek IPS-4 Specifications

General

Brand	Ametek
Model	IPS-4
Category	Measuring Instruments
Language	English