1-12 | IPS-4 Dual Bench (UV / IR) Analyzer
Supplemental Information – Where Can I Find It?
Some analyzers are configured with optional equipment that may require
supplementary information. The analyzer manual and this additional
information (not part of the main manual) – collectively known as the
Documentation Package – is included with the manual.
The Documentation Package shipped with each analyzer includes the fol-
lowing:
• Manual Supplements that describe and illustrate installation, operation,
layout, and maintenance procedures for non-standard Measuring
Cells* or optional equipment*, non-standard (derivative) analyzer
models, or information that is intended to replace similar information
in the Operator’s Guide. (*These documents can also include a non-
standard Spare Parts List or a separate Custom Spare Parts List.)
• Analyzer Configuration Parameters sheet, which lists the critical analyzer
operating parameters.
• Optical Bench Calibration Summary Report (Pixel to Wavelength) Sheet,
which is a summary report.
• Signed Final QC (Quality Control) Document, which includes AMETEK
Testing Quality Control information for the analyzer.
• Final "As-Built" drawings which are customer-specific drawings for the
analyzer system.
• Other customer-specific information may also be included (if appli-
cable), such as Product Data Sheets, a Custom Spare Parts list, or analyzer
Certificates.
To Next Page
Loading...
Need help?
General
