Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions as
follows:
An operating procedure which, if not strictly observed, may result in personal injury or envi-
ronmental contamination.
An operating procedure which, if not strictly observed, may result in damage to the
equipment.
Important information that should not be overlooked.
Electrical Safety
High voltages are present in the analyzer housings. Always shut down power source(s) before perform-
ing maintenance or troubleshooting. Only a qualied electrician should make electrical connections and
ground checks.
Any use of the equipment in a manner not specied by the manufacturer may impair the safety protection
originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specications and safety protection are void if instru-
ment is operated from an improperly grounded power source.
Verify ground continuity of all equipment before applying power.
!
CAUTION
NOTE
!
CAUTION
!
WARNING
Contents | ix