2-2 | IPS-4 Dual Bench (UV / IR) Analyzer
24-Hour Zero Drift
< 1.0 % of full-scale range over 24 hours
Inputs
Two (2) non-isolated analog inputs, configurable as 0–20 mA, 4–20 mA, or
0–5 V.
Two (2) optically isolated discrete DC inputs
(minimum voltage: 11.5 V; maximum voltage: 24.5 V)
22-key piezoelectric numeric keypad.
Outputs
256 x 64 pixel vacuum-fluorescent display with multilingual capability.
Four (4) isolated analog outputs, configurable as 0–20 mA or 4–20 mA
(eight optional).
Up to eight (8) relays (NO, contact rating 100 VA, 240 V maximum), which
indicate the operational status of the analyzer. Each relay provides one
SPST (Form A) dry (potential free) contact.
Two form C loss of purge alarm contacts rated 240 Vac 5 A max.
RS-485 serial port, isolated.
RS-232 serial port, non-isolated.
Fast Ethernet (IEE802.3).
Modbus TCP (Supports single Modbus Client ).
To Next Page
Loading...
Need help?
General
