Specications | 2-1
SPECIFICATIONS
Analytes
Up to eight analytes, depending on the application.
Response Linearity
+/- 1% of full scale range
Measurement Accuracy
+/- 1% or +/- 2% of full scale (typical – application specific). Accuracy is
determined by comparing analyzer response to a known standard sample
after a calibration has been performed.
Repeatability
< 1.0 % of full-scale range (application specific)
Linearity
< 1.0 % of full-scale range
Stability
+/- 1% of full scale range
To Next Page
Loading...
