Controller / User Interface | 4-39
To back up configuration settings:
1. Press the SETUP soft key and then use the DOWN arrow to scroll down
until the Backup/Restore sub-menu is selected. Press ENTER to view
the Backup/Restore screen.
2. Select Backup settings and press ENTER. The software will prompt:
“Backup settings. Are you sure?” (Figure 4-34).
• Press CANCEL (X) to answer no.
• Press ENTER ( ) to answer yes. The analyzer begins backing up
its current configuration settings to a file called “user.xml.” The
message “Please wait ...” appears while the analyzer backs up its
settings.
Figure 4-34.
screen.
Backup settings. Are you sure?
Press
for yes.
Press X for no.
HOME ALARMS STATUS SETUP
To restore configuration settings:
1. Press the SETUP soft key and then use the DOWN arrow to scroll down
until the Backup/Restore sub-menu is selected. Press ENTER to view
the Backup/Restore screen.
2. Select the appropriate type of file restoration:
• Select Restore settings if you wish to restore settings you last
saved using the Backup settings command.
• Select Restore factory settings if you wish to restore settings to the
factory default settings.
To Next Page
Loading...
Need help?
General
