Ametek IPS-4 User Manual

EU Declaration of Conformity
PN 903-8805 Rev C
EU Declaration of Conformity
Manufacturer’s Name: AMETEK Canada
A Division of AMETEK Process & Analytical Instruments
(ISO 9001:2008 Registered)
Manufacturer’s Address: 2876 Sunridge Way N.E.
Calgary, Alberta, Canada T1Y 7H9
Phone: (403) 235-8400 / Fax: (403) 248-3550
EU Representative Address: AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Str. 16
D-40670 Meerbusch, Germany
Phone 49-2159 91 36 0 / Fax: 49-2159 91 36 80
Declare under our sole responsibility that the product:
Product Name: Model IPS-4 Analyzer
Model Name/Number: Full Spectrum Option
Markings:
II 2 G Ex db pxb IIC T3 Gb IP65, -20 °C ≤ Ta ≤ +50 °C
Conforms to the following EU Standards and Directives:
Electromagnetic Compatibility Directive 2014/30/EU using the following standards:
EN 61000-6-4 Emission standard for industrial environments.
EN 55011 Industrial, Scientic and Medical equipment – Class A.
Radiated Electromagnetic Emissions, Class A 30 MHz to 1 GHz.
EN 55011 Conducted Electromagnetic Emissions, Class A.
EN 61000-6-2 Immunity for industrial environments.
EN 61000-4-2 Testing and measurement techniques – Electrostatic discharge immunity test.
EN 61000-4-3 Testing and measurement techniques – Radiated, radio-frequency, electromagnetic eld
immunity test.
EN 61000-4-4 Testing and measurement techniques – Electrical fast transient/burst immunity test.
EN 61000-4-5 Testing and measurement techniques – Surge immunity test.
EN 61000-4-6 Testing and measurement techniques – Conducted RF immunity (Immunity to conducted
disturbances, induced by radio-frequency elds).
EN 61000-4-11 Testing and measurement techniques – Power line voltage dips/interrupts (Voltage dips,
short interruptions and voltage variations immunity tests).
EN 61326-1 Electrical equipment for measurement, control, and laboratory use – EMC requirements –
(Part 1: General requirements).
Restriction of Hazardous Substances Directive 2011/65/EU (RoHS 2):
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances.
Low Voltage Directive 2014/35/EU using the following standards:
EN 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1. General requirements.
Page 1 of 2
Canada
A DIVISION OF AMETEK PROCESS & ANALYTICAL INSTRUMENTS
xvi | IPS-4 Dual Bench (UV / IR) Analyzer

Ametek IPS-4 Specifications

General

Brand	Ametek
Model	IPS-4
Category	Measuring Instruments
Language	English