6-2 VNA Key Functions VNA View Menus
6-2 PN: 10580-00289 Rev. K Vector Network Analyzer MG
• “DUT Port Setup Menu (Waveguide)” on page 6-33
• “Cal Kit Definition Menus for Waveguide” on page 6-34
• “DUT Connector Selector List Box for Waveguide” on page 6-35
• “Calibration Types” on page 6-37
• “Limit Menus” on page 6-38
• “Limit Menu” on page 6-39
• “Limit Edit Menu” on page 6-40
• “Marker Menus” on page 6-41
• “Marker Menu” on page 6-42
• “Marker Search Menu” on page 6-43
• “Readout Format Menu” on page 6-44
• “Measurement Menus” on page 6-45
• “Measure Menu” on page 6-46
• “S-Parameter List Box” on page 6-47
• “S-Parameter Menu” on page 6-48
• “Domain Menu” on page 6-49
• “Low Pass Mode Menu” on page 6-50
• “Band Pass Mode Menu” on page 6-50
• “Number of Traces Menu” on page 6-51
• “Trace Format Menu” on page 6-52
• “Sweep Menu — MS20xxC” on page 6-53
• “Sweep Menu — MS20xxB and S412E” on page 6-54
• “Configure Ports Menu” on page 6-55
• “Bias Tee Setup Menu” on page 6-56
• “Bias Tee Menu (MS20xxC only)” on page 6-57
• “Source Power Menu (MS20xxC only)” on page 6-58
• “Source Power Menu (MS20xxB and S412E only)” on page 6-58
• “Preset Menu” on page 6-59
• “Scale Menu” on page 6-60
• “Smith Scale Menu” on page 6-61
• “Polar Scale Menu” on page 6-62
• “System Menus” on page 6-63
• “System Menu” on page 6-63
• “Application Options Menu (VNA Mode)” on page 6-64
• “Trace Menu” on page 6-68
• “Display Menu (Trace)” on page 6-68
• “Trace Math Menu” on page 6-69
To Next Page
Loading...
