Anritsu MT8820C - Page 16

16
1.1.2.2. MX882112C/13C-006
Table 1.1.2.2-1 LTE FDD/TDD IP Data Transfer
Item
Specifications
Function
The Ethernet port of the LTE measurement hardware can be used to transfer
data to external devices.
1.1.2.3. MX882112C/13C-011
Table 1.1.2.3-1 LTE FDD/TDD 2x2 MIMO DL
Item
Specifications
Function
This can be used to measure the Rx performance of 2x2 MIMO mobile wireless
terminals.
RF Signal Generator
Output frequency: 400 to 3800 MHz (1-Hz steps)
400 to 6000 MHz
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.2.4. MX882112C/13C-016
Table 1.1.2.4-1 LTE FDD/TDD CS Fallback to W-CDMA/GSM
Item
Specification
Function
Supports CS fallback to W-CDMA or GSM using MT8821C
1.1.2.5. MX882112C/13C-017
Table 1.1.2.5-1 LTE FDD/ TDD CS Fallback to CDMA2000
Item
Specification
Function
Supports CS fallback to CDMA2000 using MT8821C
1.1.2.6. MX882113C-018
Table 1.1.2.6-1 LTE TDD CS Fallback to TD-SCDMA/GSM
Item
Specification
Function
Supports CS fallback to TD-SCDMA or GSM using MT8821C