Anritsu MT8820C - Page 212

212
Call Processing Parameter
1. Set Call Processing Parameter - Carrier Aggregation - Number of DL SCC to 1.
2. Set Call Processing Parameter - Packet - Server IP Address to 192.168.20.10.
3. Set Call Processing Parameter - Packet - Client IP Address 1 to 192.168.20.11.
4. Set Call Processing Parameter - Packet - Client IP Address 2 to 192.168.20.12.
5. Set Call Processing Parameter - Packet - TFT Remote IPv4 Address to 192.168.20.100.
Common Parameter - SCC-1
1. Set Common Parameter - SCC1 - Channel Bandwidth to 20 MHz.
2. Set Common Parameter - SCC1 - DL Channel to 498.
3. Set Common Parameter - SCC-1 - Output Level(EPRE) to –70.0 dBm/15 kHz.
4. Set Common Parameter - SCC1 - DL RMC - Number of RB to 100, and Common Parameter - SCC1 - DL
RMC - Starting RB to 0.
5. Set All of Common Parameter - SCC1 - DL RMC - MCS Index1/2/3 to 28.