Anritsu MT8820C - Page 223

223
Call Processing Parameter
1. Set Call Processing Parameter – Carrier Aggregation – Number of DL SCC to 2.
(When 4DL CA, Set Call Processing Parameter – Carrier Aggregation – Number of DL SCC to 3.)
2. Set Call Processing Parameter – Packet – Server IP Address to 192.168.20.10.
3. Set Call Processing Parameter – Packet – Client IP Address 1 to 192.168.20.11.
4. Set Call Processing Parameter – Packet – Client IP Address 2 to 192.168.20.12.
5. Set Call Processing Parameter – Packet – TFT Remote IPv4 Address to 192.168.20.100.
Common Parameter - SCC-1
1. Set Common Parameter – SCC1 - Channel Bandwidth to 20 MHz.
2. Set Common Parameter – SCC1 - DL Channel to 498.
3. Set Common Parameter – SCC-1 - Output Level(Total) to –35.0 dBm.
4. Set Common Parameter – SCC1 - DL RMC - Number of RB to 100, and Common Parameter – SCC1 – DL
RMC – Starting RB to 0.
5. Set All of Common Parameter – SCC1 – DL RMC – MCS Index1/2/3 to 28.