Anritsu MT8820C - Page 224

224
Common Parameter – SCC–2
1. Set Common Parameter – SCC2 – Channel Bandwidth to 20 MHz.
2. Set Common Parameter – SCC2 – DL Channel to 1575.
3. Set Common Parameter – SCC2 – Output Level(Total) to –35.0 dBm.
4. Set Common Parameter – SCC2 – DL RMC - Number of RB to 100, and Common Parameter – SCC2 –
DL RMC – Starting RB to 0.
5. Set All of Common Parameter – SCC2 – DL RMC – MCS Index1/2/3 to 28.
Common Parameter – SCC–3
1. Set Common Parameter – SCC3 – Channel Bandwidth to 20 MHz.
2. Set Common Parameter – SCC3 – DL Channel to 1773.
3. Set Common Parameter – SCC3 – Output Level(Total) to –35.0 dBm.
4. Set Common Parameter – SCC3 – DL RMC – Number of RB to 100, and Common Parameter – SCC3 –
DL RMC – Starting RB to 0.
5. Set All of Common Parameter – SCC3 – DL RMC – MCS Index1/2/3 to 28.