4-14
AX-4030
AUTION MAX AX-4030 OPERATING MANUAL
D
6 Install the introduction tray.
1 Insert the introduction tray along the introduction
arms in the grooves until the tray is sitting flat.
2 Slide the tray backward until the arrow marks are
completely visible.
• Push the tray until you feel some resistance and hear
a click.
NOTE: Be careful not to hit the introduction arms
while installing the tray.
7 Close the covers.
1 Stand the feeder unit straight up.
• Once the feeder is standing up straight, press the
feeder downward until the latch clicks and the unit
locks in place.
2 Close the side cover (a), feeder protective cover (b),
and maintenance cover (c) in that order.
To Next Page
Loading...
