AX-4030
1-45
AUTION MAX AX-4030 OPERATING MANUAL
■ ID
This instrument can assign an ID to each sample or control. An ID can contain up to 18 digits, and
include numbers, alphabetic characters (case sensitive), and hyphens (-).
For example, to enter “IM-060109-134”:
1 Press 4 four times to enter “I”.
Each time 4 is pressed, the digit at the cursor will
rotate in the order of “4”, “G”, “H”, “I”, “g”, “h”,
“i” and back to “4” again.
2 Enter all numbers and characters you want in the
same way.
REFERENCE: To enter the same number or character consecutively
Press the hyphen key. For example, to enter “AA”, enter “A”, press the hyphen key, and
enter “A”. Use the same method to enter different characters assigned to the same keys. For
example, to enter “NO”, enter “N”, press the hyphen key, and enter “O”.
REFERENCE: To enter a special character
Use the 0 key. Number “0” and special characters rotate in the following order each time 0 is
pressed:
0 (zero) → * (asterisk) → - (hyphen) → ? (question mark) →
! (exclamation mark) → . (period) → , (comma) → + (plus) → / (slash) → 0
■ To correct an entry
To correct an entry, press BS . The right-most digit is deleted each time BS is pressed.
You cannot jump to the second or later digits to delete it. For example, to change “1302” to “1402”,
press BS three times to delete “302”. With the field containing “0001”, enter “4”, “0”, and “2”
in that order.
To Next Page
Loading...
Need help?
General
