Signal Descriptions
ARM DDI 0388I Copyright © 2008-2012 ARM. All rights reserved. A-7
ID073015 Non-Confidential
A.6 Power management signals
Table A-7 shows the power management signals.
See Power management on page 2-10.
Table A-7 Power management signals
Name I/O Source Description
CPURAMCLAMP I Power controller Activates the CPU RAM interface clamps:
0 Clamps not active.
1 Clamps active.
NEONCLAMP
a
a. Only if the MPE is present.
I Activates the Cortex-A9 MPE SIMD logic clamps:
0 Clamps not active.
1 Clamps active.