Measurement Results
104
1. Power left in battery This indicates how much power there is left in the
battery. When the battery indicator is completely white
the battery is fully charged and when the battery
indicator is completely black the battery has less than
8% charge left.
2. Number of tightening
operations
The number of tightening operations that have been
performed.
3. X-bar The average value of all the measurements that have
been performed. Located in the memory.
4. Unit The unit for torque (engineering unit).
5. Confidence interval neg. The lowest possible value with a confidence of more
than 99 %.
6. Confidence interval pos. The highest possible value with a confidence of more
than 99 %.
7. Measured torque The torque value.
8. Measured angle The current angle value. If there is no angle signal this
field is empty.
9. Number of pulses If a Pulse-tool is selected, this field shows the number
of pulses for the last tightening operation. If Hz is
displayed after “No. of pulses”, pulse frequencies are
displayed. If there is no pulse tool this field is empty.
10. Last five tightening
operations
The last tightening operation entered in the memory.
With each new tightening operation the result is
displayed at the top and the old results are moved
down. When the memory is empty this field is empty.
11. Softkey text The softkey text represents the main menus of the
current programming tree and is operated by the 5
buttons located below the display. Each softkey field
displays the functionality of each button.
12. Filter frequency Filter frequency, visible for pulse tool.
To Next Page
Loading...
