System Overview
12
It incorporates all the following functionality (including all features of Basic):
§ CP / CPK
§ Real Time SPC
§ Databases for Tools, Measurements and History
§ ToolsTalk ACTA Compatible
§ Print SPC - for an entire tool / tool tightening database
§ Tool calibration.
2.1.3 ACTA 3000 Advanced Analysis
Advanced Analysis is the top of the range version. It employs a detailed graphic display
function to allow you to perform advanced analysis of the tightening characteristics of various
tools or joints.
It has the following functionality (including all features of Basic and Quality Control):
§ Tightening Traces with Zoom-In
§ Print Traces
The ACTA 3000 can easily be upgraded thanks to its flash memory, which allows
software updates straight from a PC.
All ACTA 3000 versions have an integral battery that ensures up to 3.5 hours of
continuous use for convenient tests on the production/assembly line.
The ACTA 3000 is also equipped with a PC port allowing quick upgrades and PC
integration through ToolsTalk ACTA, as well as a Printer Port and an Analogue Output
to further enhance documentation capability and quality analysis.
Setup is easily accomplished. The Atlas Copco memory transducers communicate
calibration data instantly to the ACTA 3000 at startup. Just connect and start
measuring.
The programming logic is based on read-at-a-glance menus and all programmable
parameters are divided into logical blocks with pop-up menus.
The ACTA 3000 also has a quick programming function to minimise
programming work when performing simple torque checks.
To Next Page
Loading...
