Atlas Copco ACTA 3000

Programming Tree
36
7.3 Programming tree ACTA 3000 Basic
Stat---------------
--
Print-------------------------------------
-----
Q.Prog------------
--
Speed à
1 Continuous 1 Direct driven
2 Tool rundowns 2 Pulse
3 Transducer info 3 Wrench
4 Tool setup 4 Click wrench
Conf--------------------------------------
-----
Cal----------------
---
Prog--------------------------------------
-----
1 Interface--------
--
1 User 1 Tool type setup
2 Tightening 2 Measure setup
3 Port 3 Ext. measure setup
2 Calibration------
-
1 ACTA
2 Deadweight
3 Diagnostics-----
-
1 Transducer
2 Battery
3 Track
4 Transducer memory
5 Product information
6 Options