Atlas Copco ACTA 3000

Programming Tree
39
7.5 Programming tree ACTA 3000 Advanced Analysis
View-------------- Print------------------------------------- Q.Prog---------------------------------------------------------- Speed à
1 Basic 1 Continuous 1 Direct driven
2 Custom 2 Tool rundowns 2 Pulse
3 Trace 3 Transducer info 3 Wrench
4 Tool setup 4 Click wrench
5 Tool statistics 5 Synchronise--- 1 None
6 Tool calibration
2 Other controller
7 Database-------- 1 All tools rundown 3 Focus 2000/PF2000 1 Manual input
2 All tools setup 2 RS232
3 All tools statistics
4 All tool calibration 4 DS--------------- 1 Manual input
5 Database summary 2 Infrared
8 Trace 3 RS232
5 PF3000--------- 1 Manual input
2 Infrared
3 RS232
6 PowerMacs 1 Manual input
2 RS2323
Conf--------------------------------------
Cal----------------
Prog-------------------------------------- Userà
1 Interface--------
1 User 1 Tool type setup
2 Tightening 2 Measure setup
3 Port 3 Ext. measure setup
2 Calibration------
1 ACTA 4 Statistical setup- 1 Group and batch
2 Deadweight 2 Torque
3 Tool 3 Angle
3 Diagnostics----- 1 Transducer 4 Pulse
2 Battery 5 Display setup
3 Track
4 Transducer memory
5 Product information
6 Options
Seq,no------------
Select-------------
Man.In----------- Com--------- ---à
1 Tightening 1 Controller
2 Tool comment 2 ToolsTalk ACTA
3 Controller 3 Barcode