Atlas Copco ACTA 3000

Programming
89
8.18 Statistics (Stat.)
Available in Quality Control and Advanced Analysis.
The ACTA 3000 can save and provide torque angle and number of pulses for
each measured tightening operation performed with a tool. In addition to this the
QC and AA versions can calculate and supply detailed statistics of all the
tightening operations saved in the database for each specific tool.
Below you will find descriptions of the statistical capabilities of each version.
Stat.
1. All tightening operations
2. Statistics torque
3. Statistics angle
4. Statistics no. of pulses
5. History----------------
--
1. Torque---------
-
1. Table
2. X graph
3. R graph
4. σ graph
2. Angle-----------
1. Table
2. X graph
3. R graph
4. σ graph
3. No. of pulses--- 1. Table
2. X graph
3. R graph
4. σ graph