Technical Specifications
164
15.4 Connectors
1 2 3 4
5
6
Connector Type
1. 100-240 V AC supply Industrial standard female 3-pole power supply
2. Transducer Industrial standard female 19-pole MS31121219S
3. Printer Industrial standard female 25-pole Dsub.
Note! The ACTA 3000 should only be connected to
printers conforming to IEC 950 standard.
4. PC / BCR (Barcode Reader) Industrial standard female 9-pole Dsub
5. Oscilloscope Industrial standard female BNC
6. IR (Infrared) -
15.4.1 Transducer Pin Description
Pin Description Pin Description
A Excitation, +5Vd.c. L -
B Excitation, -5Vd.c. M -
C + Signal N Gnd
D - Signal P Gnd Angle encoder & transducer memory
E Shield R +5Vd.c. to angle encoder
F Angle encoder cw trail S Yellow LEDs
G Clock signal for transducer memory T +8V To transducer memory
H Angle encoder cw lead U Green LEDs
J Data signal for transducer memory V Red LEDs
To Next Page
Loading...
