Measurement Results
105
10.3 Custom Measurement Window
In addition to the Basic window, the ACTA 3000 Quality Control and Advanced Analysis
also feature a Custom Display Window as seen below.
When measuring it is possible to switch between the Basic window and Custom window at
any time by using the View function, refer to the programming tree.
When initiating measurements, this is the information it provides:
ACTA 3000 Quality Control and Advanced Analysis only
1 4 16 13 2 3
11 12
1. Power left in battery and 9. Measured parameter 2
Communication symbol 10. Comments
2. Number of tightening operations 11. Softkey text
3. Batch side 12. Position of the last measurement
4. Unit 13. Name of the tool
5. Statistic parameter 1 14. User
6. Statistic parameter 2 15. Sequence number
7. Interval indicators 16. Filter frequency
8. Measured parameter 1
5
6
15
14
To Next Page
Loading...
