Quick Programming
17
4. Quick Programming
4.1 General
This section focuses on how you can start measuring in minutes with the Quick Programming
function using Atlas Copco Torque/Angle memory transducers.
All versions of the ACTA 3000 feature a Quick Programming function that allows you to set
up a measurement session without extensive programming. It is ideal with the ACTA 3000
Basic or for quick and simple torque checks.
4.2 Operating Quick-guide
After initialisation and transducer setup the ACTA 3000 is ready for programming.
To operate the ACTA 3000, use the softkeys as explained below.
Measurement Dialog Box
measurement dialog box window which
displays your results. (ACTA Basic
version window is shown here)
View, Print etc. Menu Blocks. Represent
programming tree functions or arrows.
Soft Keys. Correspond to and control
menu block or arrow above. Using these
you can move along the programming
tree and select different functions.
To Next Page
Loading...
