Measurement Results
108
10.4 Trace Measurement Window
In addition to the Basic and Custom Display Window, the ACTA 3000 Advanced
Analysis also features a Trace Display Window as seen below. When measuring, it is
possible to switch between the Torque, Custom and Trace windows at any time.
When initiating measurements, this is the information it provides:
ACTA 3000 Advanced Analysis only
1. Power left in battery and 6. Peak point
Communication symbol 7. Peak torque
2. Scale X-vice 8. Measured angle
3. Scale Y-vice left 9. Softkey text
4. Scale Y-vice right 10. Name of the tool
5. Angle start point
1
7
8
5
3
To Next Page
Loading...
