Programming
59
8.7 Select Tool (Select)
Available in Quality Control and Advanced Analysis versions.
This function is used to select different tools in your database.
1. Open the Select menu block and two pop-up dialog boxes appear. One
large dialog box that displays all the tools you have created and saved in the
database and a small dialog box with the text “Specify tool name”.
2. You can now select the tool you require by selecting your tool with the
arrows and pressing ‘Enter’. Note that the arrows allow you to scroll
through your tools in the database.
3. If you have a lot of tools in the database you can search for a tool by typing
its tool ID in the small dialog box “Specify tool name”. When you enter the
tool ID, it will be highlighted in the large dialog box and simply press ‘Enter’
to select it.
When you have completed step 2 or 3, the ACTA 3000 will automatically
return to the measurement dialog box. Your tool selection is confirmed by its tool
ID which is now displayed at the top of the measurement dialog box.
Note!
This will be the tool you measure until you select another tool by repeating steps
1 and 2.
To Next Page
Loading...
