Measurement Results
106
1. Power left in battery This indicates how much power there is left in the battery. When the
battery indicator is all white the battery is fully charged and when the
battery indicator is all black the battery has less than 8% of a full
charge left.
Communication symbol
ToolsTalk communication selected.
Focus 2000 / Power Focus 2000 communication selected.
DS serial communication selected.
DS infrared communication selected.
Power Focus 3000 serial communication selected.
Power Focus 3000 infrared communication selected.
Barcode communication selected.
PowerMac communication selected.
2. Number of tightening
operations
The number of tightening operations that have been done.
3. Batch size The number of tightening operations to be performed by the operator
of the ACTA 3000 for a complete measurement set. The ACTA 3000
will count each tightening operation and signal when the batch is
completed (three flashes on n x OK LED).
4. Unit The unit for the torque (engineering unit).
5. Statistical
parameter 1
A selectable statistical parameter for parameter 1.
6. Statistical
parameter 2
A selectable statistical parameter for parameter 2.
7. Interval indicator See below.
8. Measured
parameter 1
The value of the first parameter.
9. Measured
parameter 2
The actual value of the second parameter. If no second monitoring is
chosen from the database, this field is empty.
10. Comments Text field defined by the customer and the selected tool. Two rows
with a maximum of 20 characters in each.
To Next Page
Loading...
