Atlas Copco ACTA 3000

Programming Tree
40
Stat----------------------------------------------------- Datab-------------------------------------
Param----------
A.lyse-----------
1 All tightenings 1 New tool 1 Torque
(angle)
1 Zoom in
2 Statistics torque 2 Select tool 2 Torque (time)
2 Zoom out
3 Statistics angle 3 Delete tool- 1 Selected
tool
3 Angle (time) 3 Adjust
position
4 Statistics no. of pulses 2 All tools 4 Torque, angle
(time)
4 Save
trace-
1 Low
5 History----------
1 Torque--------
1 Table 4 Clear all measurements 2 Medium
2 X graph 5 Backup tool 3 High
3 R graph 6 Information
4 σ graph
2 Angle--------- 1 Table
2 X graph
3 R graph
4 σ graph
3 No. of pulses- 1 Table
2 X graph
3 R graph
4 σ graph