Quick Programming
22
Display Parameter Explanation
3. Confidence interval neg. The lowest possible value with a confidence of more than 99 %.
4. Confidence interval pos. The highest possible value with a confidence of more than 99 %.
5. Measured torque The torque value.
6. Measured angle The current angle value. If there is no angle signal from the
transducer, this field will be empty.
7. Name of tool If a tool has been selected from the database, the name is shown
in the header. This is not possible if the ACTA 3000 version is
Basic. In that case this field is always empty
8. Number of pulses If a Pulse tool is selected, this field shows the number of pulses for
the last tightening operation. Otherwise this field is empty.
9. Last five tightening operations The last five tightening operations entered in the memory. With
each new tightening operation the result is displayed at the top and
the older values move down. When the memory is cleared, this
field is empty.
10. Power left in battery This indicates how much power there is left in the battery. When
the battery indicator is completely white the battery is fully
charged and when the battery indicator is completely black, less
than 8% of the battery power remains. If the battery is removed
or replaced, this symbol remains empty until the battery has been
fully charged/recharged.
11. Communication Information about the current communication settings.
12. Filter frequency Filter frequency, visible for Pulse tool.
To Next Page
Loading...
