Keys and Indicators
25
8. Shift
Pressing the ‘Shift’ button activates the letters above each numeric key. Keep
pressing the numeric key to find the desired letter.
9. Cl
The ‘Clear’ button is used to erase old values in the programming blocks or to
delete the latest result of the current tightening measurement.
Note!
When the ‘Shift’ and ‘Clear’ buttons are pressed at the same time, all results of
the current tightening torque measurements will be erased or when editing data
in an input dialog box all data will be removed.
10. Display Softkeys (Blank)
Each key corresponds to various blocks of softkey text (programming tree
menus) or arrows in the display.
To Next Page
Loading...
