Programming
97
1. Select the “Hist” menu block
2. A pop-up dialog box appears with the following three parameters:
Parameter Option
1. Torque 1. Table 2. X graph 3. R graph 4. σ graph
3. First select the parameter required by highlighting it in the list above and pressing ‘Enter’, or by
pressing its number.
4. Another pop-up dialog box appears containing the following options, all related to the parameter
you have selected.
Option Content
Table Displays the date of the transfer and the X, R and σ values.
Each row represents a measurement session.
X graph Displays the date of the transfer and the X value. Each
column represents a measurement session.
R graph Displays the date of the transfer and the R value. Each
column represents a measurement session.
σ graph Displays the date of the transfer and the σ value. Each
column represents a measurement session.
5. Select the statistical option of your preference by highlighting it and pressing
‘Enter’ or by pressing its number.
6. A pop-up dialog box appears displaying the information you requested
from your selection in step 5. To exit this dialog box, simply press cancel.
To study the statistical data of all three parameters for the current tool, simply repeat steps 1-5.
To Next Page
Loading...
