SIP User's Manual 470 Document #: LTRT-65415
MediaPack Series
Parameter Description
is added as a prefix to the dialed destination number, by
using the parameter KeyBlindTransferAddPrefix.
Keypad Feature - Call Waiting Parameters
Web: Activate
EMS: Keypad Features CW
[KeyCallWaiting]
Keypad sequence that activates the Call Waiting option. After
the sequence is pressed, a confirmation tone is heard.
Web: Deactivate
EMS: Keypad Features CW Deact
[KeyCallWaitingDeact]
Keypad sequence that deactivates the Call Waiting option. After
the sequence is pressed, a confirmation tone is heard.
Keypad Feature - Reject Anonymous Call Parameters
Web: Activate
EMS: Reject Anonymous Call
[KeyRejectAnonymousCall]
Keypad sequence that activates the reject anonymous call
option, whereby the device rejects incoming anonymous calls.
After the sequence is pressed, a confirmation tone is heard.
Web: Deactivate
EMS: Reject Anonymous Call
Deact
[KeyRejectAnonymousCallDeact]
Keypad sequence that de-activates the reject anonymous call
option. After the sequence is pressed, a confirmation tone is
heard.
[RejectAnonymousCallPerPort]
This ini file table parameter determines whether the device
rejects incoming anonymous calls on FXS interfaces. The
format of this parameter is as follows:
[RejectAnonymousCallPerPort]
FORMAT RejectAnonymousCallPerPort_Index =
RejectAnonymousCallPerPort_Enable;
[\RejectAnonymousCallPerPort]
Where,
Enable = accept [0] (default) or reject [1] incoming
anonymous calls.
For example:
RejectAnonymousCallPerPort 0 = 0;
RejectAnonymousCallPerPort 1 = 1;
If enabled, when a device's FXS interface receives an
anonymous call, it responds with a 433 (Anonymity Disallowed)
SIP response.
Notes:
This parameter is applicable only to FXS interfaces.
This parameter is per device.
This parameter can appear up to 8 times for 8-port MP-11x
devices and up to 24 times for MP-124 devices.
For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 194.
To Next Page
Loading...
