AudioCodes MediaPack MP-124 User Manual

Version 6.2 503 February 2011
SIP User's Manual 12. Selected Technical Specifications
Function Specification
Loop Impedance (including
phone impedance)
Up to 1500 ohm for the MP-11x, Up to 1600 ohm for the MP-124
Lifeline
Supported in all ports of Mixed FXS/FXO and in first port of MP-
114/FXS and MP-118/FXS using special Lifeline cable
Caller ID
Bellcore GR-30-CORE Type 1 using Bell 202 FSK modulation, ETSI
Type 1, NTT, Denmark, India, Brazil, British and DTMF ETSI CID
(ETS 300-659-1)
Polarity Reversal / Wink
Immediate or smooth to prevent erroneous ringing
Metering Tones
12/16 KHz sinusoidal bursts, Generation on FXS
Distinctive Ringing
By frequency (15-100 Hz) and cadence patterns
Message Waiting Indication
DC voltage generation (TIA/EIA-464-B), V23 FSK data, Stutter dial
tone
Outdoor Protection
Over-voltage protection and surge immunity
Note: Supported only on MP-124D.
Homologation
EMC
EN55022 Class B , CFR Part 15 Class B, EN55024, EN61000-3-3,
EN61000-3-2, VCCI Class X1 (equals to class B)
Safety
EN60950-1 Safety of information technology equipment, UL60950-1
Including compliance to section 6 (over voltage protection).
Telecom
TRR-21, TIA-968

AudioCodes MediaPack MP-124 Specifications

General

Model	MediaPack MP-124
Category	Gateway
Protocols	SIP, H.323, MGCP
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Fax Support	T.38
Management	SNMP
Security	TLS/SRTP
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25 to 70°C
Humidity	10% to 90%, non-condensing
Analog Ports	24 FXS