Avaya 1230 - Page 110

Parameter Value Description
dns2 Character string with a maximum of 50
characters
Secondary DNS server URL
lldp y for yes
n for no
Enable 802.1ab LLDP.
Caution:
Changing this parameter can impact network connectivity and can require manual
correction.
prov Character string with a maximum of 50
characters
Provisioning server URL.
For an HTTP server, you must include
"http://" in the URL.
st y for yes
n for no
Enable stickiness.
cachedip y for yes
n for no
Enable cached IP.
dhcp y for yes
n for no
Enable Dynamic Host Configuration
Protocol (DHCP).
ntqos y for yes
n for no
Enable Avaya Automatic QoS
igarp y for yes
n no
Ignore GARP.
srtp y for yes
n for no
Enable SRTP-PSK.
srtpid 96 (default)
115
120
Payload type ID
Voice VLAN
vq y for yes
n for no
Enable 802.1Q for voice.
Caution:
Changing this parameter can impact network connectivity and can require manual
correction.
vcp Value from 0 to 8 802.1Q control p bit for voice stream.
vmp Value from 0 to 8 802.1Q media p bit for voice stream
vlanf y for yes n for no Enable VLAN filter on voice stream.
vvsource n for no VLAN Source of VLAN information.
Table continues…
Configure the DHCP Server
110 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com