Avaya 1230 - Page 120

Note:
Only a TFTP server can be used for a manual download.
1. Assemble the components of the new IP Deskphone, as described in Install the
IP Deskphone on page 115 or in the user guide of the appropriate IP Deskphone model.
2. Plug in the IP Deskphone.
The IP Deskphone Message Waiting LED is lit and the message
…Loading BootC…
is displayed.
In a few seconds, the following simple non-graphic text menu on white background is
displayed.
12x0 IP Phone
Manual Configuration
Avaya
3. Press the soft keys (1,2,3,4) in sequence from left to right.
BootC goes to manual configuration and the following menu is displayed on the IP
Deskphone screen.
The End of Menu
Apply Auto Cancel
Note:
If you miss this screen and the IP Deskphone begins to look for DHCP, unplug the IP
Deskphone, and repeat Step 2.
4. Press the Auto soft key.
The following menu is displayed.
01 EAP Settings
Man Cfg
AllMan
Cancel
5. Use the down arrow in the Navigation keys to scroll down and select 02 LLDP Enable.
02 LLDP Enable
Man Cfg
AllMan
Cancel
6. Press the Man soft key to manually configure LLDP.
7. Press the Cfg soft key.
8. Configure the following:
• DHCP = 0
• IP = <IP Deskphone IP address>
Install the SIP software
120 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com