Key Description
Enter Exit edit mode.
OK Exit edit mode.
BkSpc Backspace: delete highlighted characters or
character to the left
Clear Clear input field.
Cancel Exit edit mode without saving changes.
Table 18: Provisioning parameters legend
Configuration menu item List each configuration parameter in the order it
appears in the menu.
Options or input Lists every choice available for the parameter and
the minimum and maximum number of characters or
digits allowed.
Dependency Show any dependency that controls when that option
is enabled or can be used. If the prompt has a
dependency, the dependency appears on the same
line as the prompt, and input options start on the
next line of the table. If an option has a dependency,
the dependency appears on same line as the option
and applies only to that option. If both the prompt
and the option have dependencies, they are
cumulative between the prompt and the option and is
used to show multiple dependencies.
The parameters list in order of appearance.
Config option Options or input Description
Enable 802.1x (EAP) MD5 MD5 encryption.
PEAP PEAP encryption.
TLS TLS encryption.
ID 1 4 to 8 characters EAP ID.
ID 2 4 to 8 characters EAP ID.
Password 4 to 12 characters EAP password.
Enable 802.1ab (LLDP) Checked LLDP enabled.
Unchecked LLDP disabled.
Enable IPv6 Checked IPv4 and IPv6 enabled (dual-
mode).
Unchecked IPv6 disabled.
DHCP Yes DHCP used.
No Static IP and config used.
Table continues…
Manual provisioning parameters
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 135
Comments? infodev@avaya.com
To Next Page
Loading...
