Table 38: Ctrl Priority bits configuration
Ctrl Priority bits : Auto ▼
Auto
Value from 0 to 7
19. If 802.1Q is enabled, configure Media Priority bits.
Use the right arrow in the Navigation key cluster to highlight the Media Priority bits box.
Press the Select key to access a list of Media Priority bits choices.
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select the parameter.
Table 39: Media Priority bits configuration
Media Priority bits : Auto ▼
Auto
Value from 0 to 7
20. Disable PC Port configuration. Press the Select key to turn off the PC port on the
IP Deskphone.
A check mark in the Disable PC Port box indicates the PC port is disabled.
Disable PC Port can be used in an environment where administrators do not want users
accessing the data network through the built-in PC port.
Table 40: Disable PC Port configuration
Disable PC Port : □
21. If the PC port is not disabled, configure PC Port Speed in the Device Settings menu.
Use the right arrow in the Navigation key cluster to highlight the PC Port Speed box. Press
the Select key to access a list of PC Port Speed choices:
• Auto
• 10BT
• 100BT
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select a PC Port Speed.
Table 41: PC Port Speed configuration
PC Port Speed :
Auto ▼
Auto
10BT
100BT
22. If the PC port is not disabled, configure PC Port Duplex in the Device Settings menu.
Device Settings on the IP Deskphone with SIP Software
164 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
