Avaya 1230 - Page 203

Section name Key Value example Description
notifyCallForward 0 Specifies whether server-forwarded
calls make the IP Deskphone beep
Value = 0 or 1
octEndsDialing 1 Specifies if # causees dial prompts
to place call
Value = 0 or 1
outgoingPrivacy 0 Anonymization setting to use for
outgoing messages
0 = none
incomingPrivacy 0 Anonymization setting for remote
user information
0 = none
publicScaHold 0 Specifies whether others can
retrieve calls a user pus on hold
Value = 0 or 1
searchMethod 0 Search mode for searchable menus
Values: 0 = UKNOWN_SEARCH
1 = INDEX_SEARCH
2 = FIRST_CHARCTER_SEARCH
3 = NAME_SEARCH
[reasons] This section contains the list of reject
reasons
str-1 Out of office The key consists of prefix “str-“and
the sequence number 0, 1…
The value can be any string.
str-2 Busy
[subjects]
str-0 Hello!! The key consists of prefix “str-“and
the sequence number 0, 1…
The value can be any string.
str-1 Hi!
The following rules apply to the [key] section:
1. In non-IP Office mode, any keys defined as “feature” have no effect and are ignored.
2. If the “type” field is omitted, the key is considered as the “spdial” key by default.
3. If the [type] field has the incorrect paramete,r the [key] section is considered to be incorrect
and is ignored (appropriate ECR record is registered in the ECR file).
Roaming profiles
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 203
Comments? infodev@avaya.com