The following screen appears:
Figure 84: Logging Systems screen
The Logging Systems screen displays the SIP Logging subsystem. Press the Enter key in the
Navigation key cluster to switch the value of the selected sign from Yes to No, or No to Yes. Then
press the Apply soft key to apply the settings.
The following table describes the function of the context-sensitive soft keys for the Logging
Systems screen.
Table 119: Context-sensitive soft keys for the Logging Systems screen
Context-sensitive soft key Action
Apply Applies the setting and returns to the parent screen.
Back Dismisses the setting and returns you to the parent
screen.
The following table describes the function of the Navigation keys for the Logging Systems screen.
Table 120: Navigation
Key Action
Up and down arrows Use the up and down arrows to scroll the screen.
Right and left arrows Navigates through the signs.
Enter Switches the value of the selected sign from ON to
OFF, and OFF to ON.
You can enable or disable SIP-logging using the following command in the Device configuration file:
Diagnostics and troubleshooting
350 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
