Avaya 1230 - Page 74

Location Time zone offset (seconds)
(GMT+07:00) Bangkok 25200
(GMT+08:00) China Standard Time 28800
(GMT+09:00) Japan Standard Time 32400
(GMT+09:30) Australian Central Standard Time 34200
(GMT+10:00) Australian Eastern Standard Time 36000
(GMT+11:00) Micronesia 39600
(GMT+12:00) Fiji 43200
(GMT+13:00) New Zealand 46800
• FORCE_TIME_ZONE [YES | NO] — allows you to force the timezone offset on each user's
IP Deskphone. The default is NO.
- YES - forces the IP Deskphone to use the TIMEZONE_OFFSET specified in the device
configuration file.
- NO - uses the value stored in the user preferences.
• IM_MODE [ENCRYPTED | TEXT | SIMPLE | DISABLED] — is used to configure the mode of
Instant Messaging (IM). The default setting is ENCRYPTED.
- ENCRYPTED - Instant Messages are sent encrypted.
- TEXT - Instant Messages are sent as text.
- SIMPLE - Instant Messages are sent using SIP for Instant Messaging and Presence
Leveraging Extensions (SIMPLE) protocol.
- DISABLED - Instant Messaging is turned off and no Instant Messages can be sent or
received.
Note:
According to Federal Requirements:
- If the parameter FIPS_MODE=NO and IM_MODE=TEXT, the IM_MODE is changed to
ENCRYPTED by force.
- If the parameter FIPS_MODE=YES, the IM_MODE is changed to TEXT by force
• DEF_DISPLAY_IM [YES | NO] — enables or disables the display of Instant Messages (IM).
The default setting is NO.
- YES - enables display of IMs.
- NO - disables display of IMs.
• SELECT_LAST_INCOMING — is used to determine which call is selected when there are
multiple calls ringing (or active). The default value is 0.
- 0 — leaves the last selected call static as new calls come in or are dropped.
- 1 — the selected call in the call list jumps to the most recent ringing call after it is added to
the list.
Creating the provisioning files
74 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com