Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Checklists
xChecklists for Installation Technicians
System Initialization Checklist
This checklist highlights the high-level tasks required to initialize the Avaya IP600 Definity One
system.
Installation Tasks For More Information
Power up and observe that the LEDs on the
TN2314 circuit pack light according to a
predefined sequence.
See ‘‘Power up and observe
LEDs’’ on page 3-4.
Connect the laptop computer. See ‘‘Connect the laptop
computer to DEFINITY ONE
or IP600’’ on page 2-2.
Start a Telnet session. See ‘‘Via a Telnet session’’ on
page 2-31.
Verify the software version number with the
CD-ROM that shipped with the system.
Version #: ______________
See ‘‘Verify the software
version number’’ on page 3-5.
Determine the correct serial number.
Serial #: ________________
See ‘‘Determine the serial
number’’ on page 3-5.
Download a license using Avaya’s Remote
Activation Feature (RFA).
— If you have the serial # from the order,
this step may be completed prior to the
site visit.
See
http://www.avaya.com/service
s/rfa for instructions on how to
use RFA.
Download a password file.
Download an installation script.
— Both of these steps may be completed
prior to the site visit.
See ‘‘Download the password
file and installation script using
the Automatic Registration
Tool (ART)’’ on page 3-6
or
‘‘International Password File
Procedures’’ on page 3-9.
Install the license file and installation scripts
using FTP to transfer files.
See ‘‘Transfer and install the
password file and installation
scripts’’ on page 3-10.
Test alarming on DEFINITY One or IP600. See ‘‘Checking Alarms’’ on
page 3-18.
To Next Page
Loading...
