Avaya DEFINITY ONE - Page 11

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Checklists
xiChecklists for Installation Technicians
 Resolve any alarms. See Maintenance for
DEFINITY One
Communications System
Release 10 (555-233-130)
or Maintenance for Avaya
IP600 Internet Protocol
Communication Server
(555-600-100).
 Check system status using bash commands. See ‘‘Avaya (Lucent) access
controller bash commands’’ on
page G-1.
 Place test calls to verify that the dial tone,
ringing pattern, and talk path are acceptable.
See ‘‘Place a test call’’ on page
3-19.
 Enable customer logins.
~ Intuity Audix logins
~ Customer Web logins
~ DEFINITY One or IP600 logins
See:
‘‘Enable Intuity AUDIX
logins’’ on page 3-20.
‘‘Enable customer Web
logins’’ on page 3-20.
‘‘Set Up and Use of Customer
Logins’’ on page B-1.
‘‘Windows logins for the
customer’’ on page B-2.
‘‘DEFINITY logins for the
customer’’ on page B-8.
 Administer DEFINITY One or IP600.
~ Use Windows 2000 to set the system date
and time.
~ Administer customer’s LAN interface.
~ Set up country specific call progress tones.
~ Enable or disable SNMP.
~ Set country options on the change system
parameters country options screen.
~ Set up your systems.
~ Add translations.
~ Administer telephone features per customer
order.
~ Set up Call Detail Recording (CDR).
See ‘‘Administer DEFINITY
ONE or IP600’’ on page 3-20.
Installation Tasks For More Information