5/32
Chapter 5: Routine Operational Procedures
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
13.- When all devices have been set to satisfaction, press the Change parameters tab and press
the “Use parameters button”
to the bottom of the screen to activate the changes.
14.- Finally the resulting settings should be tested on real product. Make adjustments to the threshold
fi lters when necessary (steps 10-12). This can be done by starting up production or by sorting small test
batches of the product.
15.- It is advisable to regularly check the results of the sorting process during production. It may
be necessary to make small adjustments to the threshold fi lters to compensate for small changes in the
incoming product (steps 10 to 12).
To Next Page
Loading...