Safety prefaces
II
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
Picture: Main power switch OFF
Preface B:
GENIUS Compact Electrical Safety
Electrical Safety
- The GENIUS Compact Sorter uses AC and DC voltages, all power requirements can be found in chapter
2 under 2.3. Technical Data.
- Service should be provided by qualifi ed personnel, authorized by BESTnv.
- Always follow the electrical safety procedures when handling the electrical installation (see Basic
Electrical Safety Procedure and Main Power Safety Procedure later in this chapter).
Basic Electrical Safety Procedure
During maintenance and service of the electrical installation and when repairing or adapting the electrical
installation, all power to the installation should be cut, except to the main power switch installation.
In order to ensure the safety of the maintenance and service personnel the power should be cut by
pressing the Emergency button and locking the main power switch in the OFF position, using a padlock
with a shackle of 6 to 8mm thick in cross section, as indicated in the picture above (see also Main Power
Switch Safety label).
To Next Page
Loading...