III
Safety prefaces
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 ©
BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
Main Power Safety Procedure
When installing the GENIUS Compact sorter or when replacing the main power switch installation, all
power to the installation, including the main power switch, must be cut, in order to ensure the safety of
the maintenance and service personnel.
In order to accomplish this, all power connections to the sorter and related machinery should be cut,
either by use of circuit breakers or by removing the appropriate plugs from their sockets. In order to be
absolutely safe, it might be advisable to check, using a voltmeter, that the main power switch or any other
part of the installation is not charged.
Emergency Stop
In case of emergency press one of the Red/Yellow buttons (see picture) on the sorter. The electrical power
to all moving parts on the machine and to the lighting installation will be cut immediately.
Attention: - Do not use the Emergency Stop for routine shutdown!
- Frequent use of the Emergency Stop may result in damaged equipment or
premature failures of certain electrical or electronic components (see
Emergency Stop Label underneath).
To Next Page
Loading...